AeroBar® 5710 FPD Ionizing Bar

Input Voltage	24 VDC ±10%, 12W (max)
Discharge	<1.5 sec for ±1000V to ±100V discharge @ 30 cm (12”), 50 mm air jet spacing with min CDA 2 lpm/airjet
Balance	Inherently self-balancing system <±25V over the length of the bar; maintain balance setting >6 months without cleaning
Ion Emission	Micropulsed high voltage technology
Emitters	Tungsten wire, 80 micron dia.
Air Delivery Options	Air jet spacing at either 50 mm (recommended for target distances up to 600 mm) or 75 mm; 5710 can be ordered with straight air jets or alternately left & right angled air jets
Cleanliness	ISO 14644-1 Class 2 (better than Fed. Std. 209E Class 1)
Dimension	3.0H x 1.3W x 15.75/19.7/25.6/29.5/35.4/39.4/45.3/49.2/55.1/ 59.1/65/68.9/74.8/78.75/84.65/88.6/94.5/98.4/ 104.3/108.25/114.15/118.1L in. (76H x 33W x 400/500/650/750/900/1000/1150/ 1250/1400/1500/1650/1750/1900/2000/2150/ 2250/2400/2500/2650/2750/2900/3000L mm)
Weight

Category: General Purpose

Description

High Voltage Ionizing System Particularly Suited for Sensitive Flat Panels

Simco-Ion’s μWire (“Microwire”) AeroBar Model 5710 is a cost-effective, high-performance ionizer specifically designed to eliminate static charge on large surface areas. The μWire AeroBar is particularly suited for sensitive flat panels where fast discharge times and low swing voltages are desired. The μWire AeroBar utilizes MicroPulse technology applied to a corona wire system for optimal performance. MicroPulse technology reduces ion recombination at the corona wire, thus increasing product efficiency and performance.