AeroBar® 5710 FPD Ionizing Bar

Input Voltage 24 VDC ±10%, 12W (max)
Discharge <1.5 sec for ±1000V to ±100V discharge @ 30 cm (12”), 50 mm air jet spacing with min CDA 2 lpm/airjet
Balance Inherently self-balancing system <±25V over the length of the bar; maintain balance setting >6 months without cleaning
Ion Emission Micropulsed high voltage technology
Emitters Tungsten wire, 80 micron dia.
Air Delivery Options Air jet spacing at either 50 mm (recommended for target distances up to 600 mm) or 75 mm;
5710 can be ordered with straight air jets or alternately left & right angled air jets
Cleanliness ISO 14644-1 Class 2 (better than Fed. Std. 209E Class 1)
Dimension 3.0H x 1.3W x 15.75/19.7/25.6/29.5/35.4/39.4/45.3/49.2/55.1/
59.1/65/68.9/74.8/78.75/84.65/88.6/94.5/98.4/
104.3/108.25/114.15/118.1L in.
(76H x 33W x 400/500/650/750/900/1000/1150/
1250/1400/1500/1650/1750/1900/2000/2150/
2250/2400/2500/2650/2750/2900/3000L mm)
Weight
Danh mục:

High Voltage Ionizing System Particularly Suited for Sensitive Flat Panels

Simco-Ion’s μWire (“Microwire”) AeroBar Model 5710 is a cost-effective, high-performance ionizer specifically designed to eliminate static charge on large surface areas. The μWire AeroBar is particularly suited for sensitive flat panels where fast discharge times and low swing voltages are desired. The μWire AeroBar utilizes MicroPulse technology applied to a corona wire system for optimal performance. MicroPulse technology reduces ion recombination at the corona wire, thus increasing product efficiency and performance.

  • Unique corona wire design (no emitter points)
  • MicroPulse high voltage technology
  • Flexible and powerful setup

Download Datasheet

 AeroBar 5710